+7 (812) 645-08-06
Portable CMMs: 3D measuring arms, laser trackers
select brand
3D measuring arm - SpinArm-Apex series
The SpinArm-Apex is a fully articulated coordinate measuring system which boasts a broad range of measurements. The SpinArm-Apex has a highly portable design which allows...
3D measuring arm - SpinArm-Apex series
The SpinArm-Apex is a fully articulated coordinate measuring system which boasts a broad range of measurements. The SpinArm-Apex has a highly portable design which allows the system to be placed at any point near the workpiece.
Complex shaped workpieces can be measured in any direction. The usability is greatly increased due to a brake mechanism. Easier operation can occur due to the counterbalance. Both non-contact line laser probes and contact probes are concurrently supported. Its portability means that the measurement system can be positioned near to the workpiece. The SpinArm-Apex is not for use in and cannot be exported to the United States.
Complex shaped workpieces can be measured in any direction. The usability is greatly increased due to a brake mechanism. Easier operation can occur due to the counterbalance. Both non-contact line laser probes and contact probes are concurrently supported. Its portability means that the measurement system can be positioned near to the workpiece. The SpinArm-Apex is not for use in and cannot be exported to the United States.
Articulated 3D measuring arm - 50 - 200 mm | MMDx series
The ModelMaker MMDx handheld laser scanners are ideally suited for portable 3D inspection and reverse engineering applications. Its camera technology is a major leap forward in 3D laser scanning,...
Articulated 3D measuring arm - 50 - 200 mm | MMDx series
The ModelMaker MMDx handheld laser scanners are ideally suited for portable 3D inspection and reverse engineering applications. Its camera technology is a major leap forward in 3D laser scanning, as it introduces a high frame rate and a large stripe width up to 200mm for ultra-productive scanning. MMDx incorporates Enhanced Sensor Performance (ESP3) to scan all sample materials and surface finishes in a single move.
Key benefits
Faster and more accurate scanning saves money and time
Ergonomic, light and small scanner
Scans almost all industrial materials
Portable out-of-the box system
Easy and fast plug & play set-up
Designed for use in all shop floor conditions
Optimized for hard-to-scan surfaces
Key benefits
Faster and more accurate scanning saves money and time
Ergonomic, light and small scanner
Scans almost all industrial materials
Portable out-of-the box system
Easy and fast plug & play set-up
Designed for use in all shop floor conditions
Optimized for hard-to-scan surfaces
Articulated 3D measuring arm - 2.0 - 4.5 m (6.6 - 14.8 ft) | MCAx series
The MCAx Manual Coordinate measuring Arm is a portable 7-axis measuring arm which is easy to use and reliable. It proves to be the perfect partner for for the ModelMaker MMDx/MMCx digital handheld...
Articulated 3D measuring arm - 2.0 - 4.5 m (6.6 - 14.8 ft) | MCAx series
The MCAx Manual Coordinate measuring Arm is a portable 7-axis measuring arm which is easy to use and reliable. It proves to be the perfect partner for for the ModelMaker MMDx/MMCx digital handheld laser scanners along with the Focus 10 Handheld scanning and inspection software. Its accuracy, capability and portability is best suited for metrology lab, on the shop floor and in-the-field.
The MCAx Arm also offers various probing systems for tasks such as laser scanning, touch-trigger measurements and continuous scanning. It also has a high flexibility which makes it ideal for a variety of measurement tasks. The new 7-axis MCAx range of articulated arms has the capacity to measure volumes ranging from 2.0 and 4.5 meter diameter.
The MCAx Arm also offers various probing systems for tasks such as laser scanning, touch-trigger measurements and continuous scanning. It also has a high flexibility which makes it ideal for a variety of measurement tasks. The new 7-axis MCAx range of articulated arms has the capacity to measure volumes ranging from 2.0 and 4.5 meter diameter.
3D optical coordinate measuring machine (CMM) - 11 - 17 m³ | K-Series
The K-Series Optical CMM systems from Nikon are portable vital metrology tools that offer the advantage of freely scanning a multitude of inspection points on the go. They can be used for handheld...
3D optical coordinate measuring machine (CMM) - 11 - 17 m³ | K-Series
The K-Series Optical CMM systems from Nikon are portable vital metrology tools that offer the advantage of freely scanning a multitude of inspection points on the go. They can be used for handheld and robotized 3D inspection, motion analysis and robot metrology.
The optical K-Series measurement systems are available in both portable and mobile configurations which allow an easy installation, user-friendly operation as well as free measurements through the walk-around SpaceProbe and K-Scan. They offer high measuring flexibility, thanks to features such as dynamic referencing and automatic probe recognition. The larger and expandable measuring volume of 17 cubic meters is suited for full-vehicle analysis or measuring large-sized specimens.
The optical K-Series measurement systems are available in both portable and mobile configurations which allow an easy installation, user-friendly operation as well as free measurements through the walk-around SpaceProbe and K-Scan. They offer high measuring flexibility, thanks to features such as dynamic referencing and automatic probe recognition. The larger and expandable measuring volume of 17 cubic meters is suited for full-vehicle analysis or measuring large-sized specimens.
Laser tracker - max. 4000 pts/s | MV330/350
The Laser Radar MV330/350 is a measuring equipment which can be utilized in substantial-volume applications. It is capable of non-contact...
Laser tracker - max. 4000 pts/s | MV330/350
The Laser Radar MV330/350 is a measuring equipment which can be utilized in substantial-volume applications. It is capable of non-contact measurement working within a 50 meter radius. This metrology equipment does not necessitate for a photogrammetry targets retro-reflectors/probes and laser tracker, spherically installed retro-flectors in order to work.
It is ideal and suitable for using in the fields of telescope optics, aircraft component assessment, antennae and other relative industry.
It is ideal and suitable for using in the fields of telescope optics, aircraft component assessment, antennae and other relative industry.
Large volume tracking system - iGPS
iGPS is a stackable huge level metrology resolution that changes great manufacture facilities into precise metrology-permitted...
Large volume tracking system - iGPS
iGPS is a stackable huge level metrology resolution that changes great manufacture facilities into precise metrology-permitted regions. Inside the facility, a limitless amount of handheld dimension probes or trailing detectors can work simultaneously. Important advantages include: Calculate anywhere inside the scalable metrology-permitted region, simultaneous use of limitless amount of handheld probes and trailing detectors and consistent precision all through the whole workplace
Portable 3D measuring arm / 6-axis - Kreon ACE 6 axis
The great styling of the new Kreon Ace 6 axis arm covers a very high level of technology and material.
The arm is temperature regulated and can be used either in metrological...
The arm is temperature regulated and can be used either in metrological...
Portable 3D measuring arm / 6-axis - Kreon ACE 6 axis
The great styling of the new Kreon Ace 6 axis arm covers a very high level of technology and material.
The arm is temperature regulated and can be used either in metrological department or in the workshop. The Kreon Ace 6 axis arm can be used without power supply thanks to its integrated battery and with a wireless connection.
Current Kreon 3D laser scanners (Zephyr II, Zephyr II Blue, Solano, Solano Blue) are integrated with the Kreon Ace 6 axis arm; providing a unique tactile and scanning solution.
Scanners and probes are plug-and-play and can be used with a lot of application software (Metrolog, PowerInspect, Polyworks, Geomagic, Capps)
The arm is temperature regulated and can be used either in metrological department or in the workshop. The Kreon Ace 6 axis arm can be used without power supply thanks to its integrated battery and with a wireless connection.
Current Kreon 3D laser scanners (Zephyr II, Zephyr II Blue, Solano, Solano Blue) are integrated with the Kreon Ace 6 axis arm; providing a unique tactile and scanning solution.
Scanners and probes are plug-and-play and can be used with a lot of application software (Metrolog, PowerInspect, Polyworks, Geomagic, Capps)
Portable 3D measuring arm / 6-axis - Kreon ACE 6 axis portable
The great styling of the new Kreon Ace 6 axis arm covers a very high level of technology and material.
The arm is temperature regulated and can be used either in metrological...
The arm is temperature regulated and can be used either in metrological...
Portable 3D measuring arm / 6-axis - Kreon ACE 6 axis portable
The great styling of the new Kreon Ace 6 axis arm covers a very high level of technology and material.
The arm is temperature regulated and can be used either in metrological department or in the workshop. The Kreon Ace 6 axis arm can be used without power supply thanks to its integrated battery and with a wireless connection.
Current Kreon 3D laser scanners (Zephyr II, Zephyr II Blue, Solano, Solano Blue) are integrated with the Kreon Ace 6 axis arm; providing a unique tactile and scanning solution.
Scanners and probes are plug-and-play and can be used with a lot of application software (Metrolog, PowerInspect, Polyworks, Geomagic, Capps)
The arm is temperature regulated and can be used either in metrological department or in the workshop. The Kreon Ace 6 axis arm can be used without power supply thanks to its integrated battery and with a wireless connection.
Current Kreon 3D laser scanners (Zephyr II, Zephyr II Blue, Solano, Solano Blue) are integrated with the Kreon Ace 6 axis arm; providing a unique tactile and scanning solution.
Scanners and probes are plug-and-play and can be used with a lot of application software (Metrolog, PowerInspect, Polyworks, Geomagic, Capps)
Portable 3D measuring arm / with laser scanner integrated - Kreon ACE 7 axis
KREON ACE measuring arm combines aesthetics and utility. The device's arm is temperature regulated. It can be used in a variety of applications such as metrological...
Portable 3D measuring arm / with laser scanner integrated - Kreon ACE 7 axis
KREON ACE measuring arm combines aesthetics and utility. The device's arm is temperature regulated. It can be used in a variety of applications such as metrological department or in a workshop. It also comes with an integrated battery and a wireless connectivity which allows for usage without power. This makes it highly suitable for applications involving probing. It also comes with KREON 3D laser scanners (Zephyr II and Solano). KREON ACE measuring arm is a plug and play device and thus easy to use. It can be used in conjunction with a wide range of software such as Metrolog, Polyworks, Geomagic, PowerInspect, Rapidform and Capps.
Portable 3D measuring arm / with laser scanner integrated - Kreon SCANFLEX
KREON SCANFLEX are available in 3 variants to provide the customers with solution from the entry level to the high-end based on application, accuracy and budget. Baces 100i and Zephyr II from ScanFlex Premium ZII are the fastest...
Portable 3D measuring arm / with laser scanner integrated - Kreon SCANFLEX
KREON SCANFLEX are available in 3 variants to provide the customers with solution from the entry level to the high-end based on application, accuracy and budget. Baces 100i and Zephyr II from ScanFlex Premium ZII are the fastest portable scanning solution in the present market. The scanner in integration with the arm provides optimum result with user-friendly and easy operation. KREON ZEPHYR II scanner also offers flexible interface with coordinate measuring machines. The device offers superior scanning speed and accuracy making it suitable for wide range of application. Baces 100i and Solano solution are suitable for most applications of portable measurement for automotive and aeronautic industries. The device can be easily installed making it an ideal tool in a workshop for inspection of parts. The robust and accurate device does not require any warming-up time.
Portable 3D measuring arm / 7-axis - Kreon ACE 7 axis
KREON ACE measuring arm combines aesthetics and utility. The devices arm is temperature regulated. It can be used in a variety of applications such as metrological...
Portable 3D measuring arm / 7-axis - Kreon ACE 7 axis
KREON ACE measuring arm combines aesthetics and utility. The devices arm is temperature regulated. It can be used in a variety of applications such as metrological...