+7 (812) 645-08-06
Connectors: industrial plugs and sockets
select brand
CEE plug and socket - 24 - 230 V
This plug in equipment is of industrial grade and is developed to meet CEE specifications and is defined by un interchangeable of several types of equipment owing to particular instructions. Adding to this, the units of 230 V and 400 V voltages...
CEE plug and socket - 24 - 230 V
This plug in equipment is of industrial grade and is developed to meet CEE specifications and is defined by un interchangeable of several types of equipment owing to particular instructions. Adding to this, the units of 230 V and 400 V voltages always have a shielded contact in the 6 H position (the number 6 is located in the face of the clock). Furthermore, the shielded contact is considerable thicker than the phase models, which makes it literally impossible to change any phase and hence a wrong connection.
The equipment for the 24 V voltage has no shielded contact and is characterized by violet color. The 230 Voltage equipment is blue and red is designated for the 400 V equipment. This range of equipment have varied dimensions. The amount of poles are 2 for one phase 24 volt electric current buyers 2 P + equipment for one phase 230 V electric current buyers 3 P + equipment for symmetric three phase electric current buyers (motors.
The equipment for the 24 V voltage has no shielded contact and is characterized by violet color. The 230 Voltage equipment is blue and red is designated for the 400 V equipment. This range of equipment have varied dimensions. The amount of poles are 2 for one phase 24 volt electric current buyers 2 P + equipment for one phase 230 V electric current buyers 3 P + equipment for symmetric three phase electric current buyers (motors.
Built-in electrical outlet - 16 - 63 A, 230 - 400 V
ETI industrial plug-in equipment has been made in accordance with CEE standards. Its unique construction makes the equipment non-interchangeable. The device is suitable for voltages between 230 and 400 V. Its protective contact is always...
Built-in electrical outlet - 16 - 63 A, 230 - 400 V
ETI industrial plug-in equipment has been made in accordance with CEE standards. Its unique construction makes the equipment non-interchangeable. The device is suitable for voltages between 230 and 400 V. Its protective contact is always in a 6 o'clock position.
When compared to the phase contacts, the protective contact is thicker. This eliminates the possibility of phase changing, and subsequently of a wrong connection. There is no protective contact with the 24 V voltage equipment, which is violet in color. The color of 230 V equipment is blue and of 400 V is red. Equipment dimensions vary as per individual rated currents.
In equipment for single-phase 24 V electric-current consumers, the number of poles is 2 P. In equipment for single-phase 230 V electric-current consumers, poles are 2 P +. And in equipment for symmetric three-phase electric-current consumers such as motors, number of poles is 3 P +.
When compared to the phase contacts, the protective contact is thicker. This eliminates the possibility of phase changing, and subsequently of a wrong connection. There is no protective contact with the 24 V voltage equipment, which is violet in color. The color of 230 V equipment is blue and of 400 V is red. Equipment dimensions vary as per individual rated currents.
In equipment for single-phase 24 V electric-current consumers, the number of poles is 2 P. In equipment for single-phase 230 V electric-current consumers, poles are 2 P +. And in equipment for symmetric three-phase electric-current consumers such as motors, number of poles is 3 P +.
Circular connector / power / for photovoltaic applications - 1 000 V, 22 - 30 A | CPV series
The suitability for photovoltaic wire interconnections is the first aspect to will notice about this product. The cable diameter comes in a large range, covering 1000V PV and USE-2 cables. The...
Circular connector / power / for photovoltaic applications - 1 000 V, 22 - 30 A | CPV series
The suitability for photovoltaic wire interconnections is the first aspect to will notice about this product. The cable diameter comes in a large range, covering 1000V PV and USE-2 cables. The solar connectors of type CPV are delivered with Heyco Bulkhead Connectors, creating a liquid tight seal through the panel. The connectors meet all UL and NEC requirements, while the polycarbonate construction makes them resistant to impact and improves their chemical composition. The rated current is 22A or 30A, depending on the size, while the voltage available is 1kV DC.
These items are part of the overvoltage category III class, ensuring a pollution degree of three, along with crimped terminal connections and non-rewireable conductor connections.
These items are part of the overvoltage category III class, ensuring a pollution degree of three, along with crimped terminal connections and non-rewireable conductor connections.
Plug insert - NEMA 5 - 15P
The Heyco Preassembled Cordset Components can crimp all three terminals simultaneously and enable faster plug mold loading. They reduce plug molding, cycle times and plug...
Plug insert - NEMA 5 - 15P
The Heyco Preassembled Cordset Components can crimp all three terminals simultaneously and enable faster plug mold loading. They reduce plug molding, cycle times and plug costs while improving the plug quality. The 7-shape blades have a ledge to maintain their position during overmolding.
Less brass is used in the padded version but the strength of a full thickness blade is retained at a lower cost. It can pass an elevated temperature pullout test with low cost PVC. Existing overmolds which have been designed for padded blades are accommodated by the padded bridge design. Heyco can supply automated terminating equipment and wire stripper equipment.
Less brass is used in the padded version but the strength of a full thickness blade is retained at a lower cost. It can pass an elevated temperature pullout test with low cost PVC. Existing overmolds which have been designed for padded blades are accommodated by the padded bridge design. Heyco can supply automated terminating equipment and wire stripper equipment.