+7 (812) 645-08-06
Recycling units for solid waste
select brand
Concrete recycling plant - 16 m³/h | R16S
The product is specifically designed to eradicate the residue problem and thus,...
Concrete recycling plant - 16 m³/h | R16S
The product is specifically designed to eradicate the residue problem and thus, with use of this product, attaining environment standards is made easy. Recycling of water, fines and cement can be accomplished in the most effective and profitable way. The device is completely galvanized to last for a long period.
Electronics waste recycling unit - max. 5 t/h
The main components of recycling system for refrigeration devices and e-waste are a shredder, a separation unit for PUR foam, iron, synthetic material and aluminium/copper, a pelleting press and an exhaust air decontamination system....
Electronics waste recycling unit - max. 5 t/h
The main components of recycling system for refrigeration devices and e-waste are a shredder, a separation unit for PUR foam, iron, synthetic material and aluminium/copper, a pelleting press and an exhaust air decontamination system. Before the refrigerators are broken up, the loose inner parts including glass, racks etc.and the mercury switches, if present, are taken out . This operation is followed by the disposal of the oil-CFC/Iso-butane-mixture that is done with the coolant suction system. Once the compressor is removed the refrigerator is automatically moved to the ADELMANN recycle system RPWW where the cutting unit of the two-shaft pre-shredder (AVZ) cuts it into circa 50 mm wide strips. Then the refrigerators are moved to the system located below, and broken into smaller 20 to 30 mm pieces by the ADELMANN-post-shredder (ANZ). Similarly, the household appliances (e-waste) are also moved from the first unit.
Electronics waste recycling unit - 3 - 5 t/h
The electronic scrap recycling plant consists of a separation unit, pre-shredder and a post-shredder. It provides a separation for shredded plastic, synthetic material, iron and aluminum/copper....
Electronics waste recycling unit - 3 - 5 t/h
The electronic scrap recycling plant consists of a separation unit, pre-shredder and a post-shredder. It provides a separation for shredded plastic, synthetic material, iron and aluminum/copper. In addition a CRT separation plant can be fitted in.
After the plant is fed with the electronic waste, all the loose parts such as glass, batteries, CRTs and cables are removed. The first step is cutting the e-waste into 50 mm wide stripes which are then manually separated from the hardened shafts, PCBs and capacitors. After that the waste is transported to a post shredder for shredding into the pieces that are less than 30 mm in dimension.
All the recyclable materials such as iron, aluminum plastic or copper are separated subsequently.
After the plant is fed with the electronic waste, all the loose parts such as glass, batteries, CRTs and cables are removed. The first step is cutting the e-waste into 50 mm wide stripes which are then manually separated from the hardened shafts, PCBs and capacitors. After that the waste is transported to a post shredder for shredding into the pieces that are less than 30 mm in dimension.
All the recyclable materials such as iron, aluminum plastic or copper are separated subsequently.
Refrigerator recycling unit
The recycling system for refrigeration devices consists of a shredder, a separation unit for PUR foam, iron, synthetic material and aluminuim/copper, a pelleting press and an exhaust air decontamination system.
Before...
Before...
Refrigerator recycling unit
The recycling system for refrigeration devices consists of a shredder, a separation unit for PUR foam, iron, synthetic material and aluminuim/copper, a pelleting press and an exhaust air decontamination system.
Before the refrigerators are broken up, the loose inner parts are taken out, this includes glass, racks etc. and – if present, the mercury switches. This operation is follwed by the disposal of the oil-CFC/Iso-butane-mixture that is done with the coolant suction system. After removing the compressor the refrigerator is automatically moved to the ADELMANN recycling system RPWW. The refrigerators are automatically moved to the cutting unit of the two-shaft pre-shredder (AVZ) and cut into circa 50 mm wide strips. Then the refrigerators are moved to the system located below, and broken into smaller 20 to 30 mm pieces by the Adelmann-post-shredder (ANZ).
Before the refrigerators are broken up, the loose inner parts are taken out, this includes glass, racks etc. and – if present, the mercury switches. This operation is follwed by the disposal of the oil-CFC/Iso-butane-mixture that is done with the coolant suction system. After removing the compressor the refrigerator is automatically moved to the ADELMANN recycling system RPWW. The refrigerators are automatically moved to the cutting unit of the two-shaft pre-shredder (AVZ) and cut into circa 50 mm wide strips. Then the refrigerators are moved to the system located below, and broken into smaller 20 to 30 mm pieces by the Adelmann-post-shredder (ANZ).