+7 (812) 645-08-06
Solenoid valves for all fluids
select brand
Servo-driven solenoid valve / normally closed - DN 17, 0.3 - 10 bar, 70 l/min | 01.017.115
Fluid temperature : max 90.0 °C
Operating pressure : 0.3 bar - 10 bar
DN : max 17.0 mm
2/2-way solenoid valve of nominal diameter DN 17 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this...
Operating pressure : 0.3 bar - 10 bar
DN : max 17.0 mm
2/2-way solenoid valve of nominal diameter DN 17 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this...
Servo-driven solenoid valve / normally closed - DN 17, 0.3 - 10 bar, 70 l/min | 01.017.115
2/2-way solenoid valve of nominal diameter DN 17 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are single chamber valves with the inlet ninety degrees to the outlet and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. By using high quality insulation materials, continuous operation (100% duty cycle) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel.
2/2-way solenoid valve / modular / without strainer - DN 7, 0.5 - 10 bar, 18 l/min | 52.007.126
Fluid temperature : 5 °C - 60 °C
Operating pressure : 0.5 bar - 10 bar
DN : max 7.0 mm
The modular urinal valve system includes a shut-off cock and a solenoid operated cartridge valve. The shut-off valve allows the flow to be manually...
Operating pressure : 0.5 bar - 10 bar
DN : max 7.0 mm
The modular urinal valve system includes a shut-off cock and a solenoid operated cartridge valve. The shut-off valve allows the flow to be manually...
2/2-way solenoid valve / modular / without strainer - DN 7, 0.5 - 10 bar, 18 l/min | 52.007.126
The modular urinal valve system includes a shut-off cock and a solenoid operated cartridge valve. The shut-off valve allows the flow to be manually stopped, using a standard 8 mm Allen key. Variants without shut off cock are also available. The cartridge valve is inserted in the valve body and secured by a gland nut, which makes removable for maintenance simple. All 50.007.101 series bi- and mono-stable cartridge valves can be used. For flushing the pipework before initial operation or after maintenance, the cartridge valve can be replaced by a plug.
2/2-way solenoid valve / modular / with strainer - DN 7, 0.5 - 10 bar, 18 l/min | 52.007.2xx
Fluid temperature : 5 °C - 60 °C
Operating pressure : 0.5 bar - 10 bar
DN : max 7.0 mm
The Modular Urinal Valve System includes a shut-off valve, a strainer and solenoid operated cartridge valve. The shut-off valve allows the flow to be manually stopped, using a standard...
Operating pressure : 0.5 bar - 10 bar
DN : max 7.0 mm
The Modular Urinal Valve System includes a shut-off valve, a strainer and solenoid operated cartridge valve. The shut-off valve allows the flow to be manually stopped, using a standard...
2/2-way solenoid valve / modular / with strainer - DN 7, 0.5 - 10 bar, 18 l/min | 52.007.2xx
The Modular Urinal Valve System includes a shut-off valve, a strainer and solenoid operated cartridge valve. The shut-off valve allows the flow to be manually stopped, using a standard 8 mm Allen key. Suspended particles are filtered by the strainer. The cartridge valve is inserted in the valve body and secured by a gland nut, which makes removable for maintenance simple. All 50.007.101 series bi-stable and mono-stable cartridge valves can be used. Strainer and cartridge valve can be assembled in 15 degree increments to each other. For flushing the pipework before initial operation or after maintenance, the cartridge valve can be replaced by a plug (see page 4). The filter insert should also be removed at initial flushing.
2/2-way solenoid valve / direct-acting - DN 40, max. 600 mbar | 04.040.113
Fluid temperature : max 90.0 °C
Operating pressure : max 0.6 bar
DN : max 40.0 mm
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type...
Operating pressure : max 0.6 bar
DN : max 40.0 mm
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type...
2/2-way solenoid valve / direct-acting - DN 40, max. 600 mbar | 04.040.113
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single chamber valve body with the inlet at ninety degrees to the outlet. They can be manufactured in various materials and equipped with threaded or hose connections. Valve housing made of PPE or stainless steel are suitable for hot water. Valve housing made of PVDF have a higher resistance to chemicals where stainless steel has both features. The smooth internal shape improves liquid flow and avoids dirt traps. The valve bodies can be equipped with an additional flush spout.
3/2-way control solenoid valve / direct-acting - DN 40, max. 150 mbar | 04.040.114
Fluid temperature : max 90.0 °C
Operating pressure : max 0.2 bar
DN : max 40.0 mm
There is a 3/2-way direct acting dump valve of nominal diameter DN 40 for managing low aggressive media, like cleaning or disinfection agents....
Operating pressure : max 0.2 bar
DN : max 40.0 mm
There is a 3/2-way direct acting dump valve of nominal diameter DN 40 for managing low aggressive media, like cleaning or disinfection agents....
3/2-way control solenoid valve / direct-acting - DN 40, max. 150 mbar | 04.040.114
There is a 3/2-way direct acting dump valve of nominal diameter DN 40 for managing low aggressive media, like cleaning or disinfection agents. These valves of this type can separate a medium control pressure chamber and can be made with a variety of materials that is built with threaded or hose connections.
The Valve with valve body is created with PPE is best for water with a higher temperature and that it is chemical-resistant by using high-quality insulation materials, continuous duty at higher medium temperatures is possible.
The Valve with valve body is created with PPE is best for water with a higher temperature and that it is chemical-resistant by using high-quality insulation materials, continuous duty at higher medium temperatures is possible.
Front panel valve - SV
In case you were looking for a high quality valve that was designed to resist and offer you high performance,...
Front panel valve - SV
In case you were looking for a high quality valve that was designed to resist and offer you high performance, regardless of the type of application you want to use it with, this is one of the models worth considering. In addition to the supported connection of type M5, other things you should know about this item include the metal valve integrated into the design and the maximum guaranteed flow capacity of 80 l/min.
Pneumatic distribution block - CPV 14
These valves are available in widths of 10, 14 and 18 mm. They operate...
Pneumatic distribution block - CPV 14
These valves are available in widths of 10, 14 and 18 mm. They operate at flow rates of 400, 800 and 1600 l/min. The valves perform diverse valve functions and additional functions can be achieved. The valves can be connected to the CPX electronic terminal by using a CP interface.
Pneumatic distribution block - VDMA
This piece of machinery is made with high quality materials that are tested...
Pneumatic distribution block - VDMA
This piece of machinery is made with high quality materials that are tested for optimal durability. The following sub bases and manifolds are mostly ideal for operations with standard valves such as GRO, LR, NAS, NAU, NAV, NAVW, NAW, NDV, NEV, NSC, NZV, VABB, VABE, VABF, VABS, VABV and VAOP.
NAMUR valve - VDI/VDE 3845
There are five different voltage types available for this product model, along with a G1/4 type connection. Note that this item...
NAMUR valve - VDI/VDE 3845
There are five different voltage types available for this product model, along with a G1/4 type connection. Note that this item can help you achieve a flow rate of maximum 1300 l / min, as long as it is used under the operating parameters recommended by the manufacturer.
The valves are of two different types, 5/2-way and 3/2 way, while the manual override system is also worth mentioning. In addition, the manual solenoid coil and the plug socket are features you should consider before buying.
The valves are of two different types, 5/2-way and 3/2 way, while the manual override system is also worth mentioning. In addition, the manual solenoid coil and the plug socket are features you should consider before buying.
Distribution block - CPX/MPA
With a flow rate that can reach a value of up to 700 l/min, you can enjoy one of the finest models on the...
Distribution block - CPX/MPA
With a flow rate that can reach a value of up to 700 l/min, you can enjoy one of the finest models on the market, available with a width between 10mm and 20mm. The flexible compressed air supply and the additional supply, selected at any desired location.
In terms of the pressure the device can be operated under, this needs to be between -0.9 and 10 bar. The item also offers a protection of type IP 65.
In terms of the pressure the device can be operated under, this needs to be between -0.9 and 10 bar. The item also offers a protection of type IP 65.
2-channel solenoid valve / fuel oil / for gas - 1/4", 230 V | MV series
Both the 2/2-way or the 3/2-way solenoid valve manages the switchover from test...
2-channel solenoid valve / fuel oil / for gas - 1/4", 230 V | MV series
Both the 2/2-way or the 3/2-way solenoid valve manages the switchover from test gas to measured gas or in other words permits the switchover of gas to various sampling points. Implementation of bypass arrangements is also possible and are usually used to shut off, release, does, distribute or mix the gas.
2-channel solenoid valve / fuel oil burner - 3/8 - 1/2", -0.9 ... +4 bar | Vakumat
Vakumat gets set up between the burner and the fuel oil tank, amid the suction line of oil fired systems according to DIN 4755, as long as the upper corner of the tank is above the burner....
2-channel solenoid valve / fuel oil burner - 3/8 - 1/2", -0.9 ... +4 bar | Vakumat
Vakumat gets set up between the burner and the fuel oil tank, amid the suction line of oil fired systems according to DIN 4755, as long as the upper corner of the tank is above the burner. If there are any leaks in the suction line, Vakumat ensures that fuel oil does not end up being siphoned out of the tank. It is best suited for DIN 51603-1 EL fuel oil. It can also be put to use in flood prone areas. Even if there are any height variations in the suction point's high low points, Vakumat keeps suction lines protected, that too at complete throughput. Only if the burner is in operation does the solenoid valve open up; if the burner is off, the pipe is shut by the valve. Vakumat is TUV tested and watertight for water columns up to 10 m.