+7 (812) 645-08-06
Immersion heaters
select brand
Threaded immersion heater - max. 5000 W | CI series
The Tabular Heaters are developed by Fepa Infrared....
Threaded immersion heater - max. 5000 W | CI series
The Tabular Heaters are developed by Fepa Infrared. They are specially built suitable for water or oil. In addition, these standard heaters are constructed for molding temperature controllers.
Flange immersion heater - DN 50 - DN 600, ø 8,5 - 16 mm| FHK series
The FHK series is manufactured by Herbst Beheizungs-Technik, and is an electronic flange heater that...
Flange immersion heater - DN 50 - DN 600, ø 8,5 - 16 mm| FHK series
The FHK series is manufactured by Herbst Beheizungs-Technik, and is an electronic flange heater that has been specifically developed to be used in heating up liquids, and gases. Thee design of the series consists of highly compacted tubular heaters that are bent into a U-shape, and either welded or hard-soldered into flange plates. The tubular heaters measure from 8.5 mm up to 16 mm in diameter.
Threaded immersion heater - ø 8.5 mm, 1 500 - 12 000 W | EHK series
The EHK series is a threaded immersion heater developed by Herbst Beheizungs-Technik. It is specifically...
Threaded immersion heater - ø 8.5 mm, 1 500 - 12 000 W | EHK series
The EHK series is a threaded immersion heater developed by Herbst Beheizungs-Technik. It is specifically built providing brass connector G 1 1/2, as well as 88. 5 mm three U-shaped hard-soldered immersion heater tubes.
In addition, the framework is constructed with stainless steel development. It is also available with 1.4541, 1.4571, 1.4828, 1.4876, and 2.4858 materials.
In addition, the framework is constructed with stainless steel development. It is also available with 1.4541, 1.4571, 1.4828, 1.4876, and 2.4858 materials.
Immersion heater with thermostat - ø 8.5 mm, 1 500 - 12 000 W | EHK series
The EHK series is manufactured by HERBST Beheizungs-Technik. This immersion heater with thermostat, is made...
Immersion heater with thermostat - ø 8.5 mm, 1 500 - 12 000 W | EHK series
The EHK series is manufactured by HERBST Beheizungs-Technik. This immersion heater with thermostat, is made from robust stainless steel. The EHK has MS connector G 1 1/2, and 3 U-shaped hard-soldered immersion heaters tubes with diameter 8,5 mm.
In addition, it has a zinc-plated steel hood. To accommodate capacities more than 11 kW, it can be provided with single-pole thermostat and second cable entrance M16.
In addition, it has a zinc-plated steel hood. To accommodate capacities more than 11 kW, it can be provided with single-pole thermostat and second cable entrance M16.
Threaded immersion heater / with thermostat - ø 8.5 mm, 3 000 - 9 000 W | EHK series
The screw plug IMMERSION HEATERs is stainless steel, with thermostat and limiter. It has...
Threaded immersion heater / with thermostat - ø 8.5 mm, 3 000 - 9 000 W | EHK series
The screw plug IMMERSION HEATERs is stainless steel, with thermostat and limiter. It has...
Threaded immersion heater - ø 8.5 mm, 3 000 - 12 000 W | EHK series
The EHK Series of Threaded Immersion Heater is manufactured by HERBST Beheizungs-Technik, and is specifically designed...
Threaded immersion heater - ø 8.5 mm, 3 000 - 12 000 W | EHK series
The EHK Series of Threaded Immersion Heater is manufactured by HERBST Beheizungs-Technik, and is specifically designed with electric heating element that consists of brass connector G 1 1/2. It is mainly used with 3 U-shaped hard-soldered copper immersion heater tubes. The provided screw plug immersion heater is also available without hood.
Moreover, this product is built with a diameter of 8.5 mm, and has a capacity of 3 000 to 12 000 W.
Moreover, this product is built with a diameter of 8.5 mm, and has a capacity of 3 000 to 12 000 W.
Threaded immersion heater - 750 - 9 000 W
The screw plug electric immersion heater proves specially suitable for heating fluids through natural or forced convection. The heaters are mainly used for water heaters, heating tanks and for fluid circulation heaters. The heaters are made of various materials...
Threaded immersion heater - 750 - 9 000 W
The screw plug electric immersion heater proves specially suitable for heating fluids through natural or forced convection. The heaters are mainly used for water heaters, heating tanks and for fluid circulation heaters. The heaters are made of various materials based in the application. The layout of heating elements enable optimum heat exchange. The 1”1/4 screw plug without electrical immersion heaters without electrical box are made of 2 U-shaped heating elements, brazed on a screw plug with WP+ seal and includes clamp type loop terminals working on 230 V 1P.
The 1P 1”1/2 screw plug immersion heaters without electrical box are made of 3 U-shaped heating elements brazed on a screw plug with WP+ seal and includes clamp type loop terminals working on 230 V/400 V 3P. The 1”1/2 screw plug immersion heaters without electrical box are made of U-shaped heating elements, soldered on a screw plug with waterproof sealing. It includes M 4 threaded terminals and 8 mm diameter pins.
The 1P 1”1/2 screw plug immersion heaters without electrical box are made of 3 U-shaped heating elements brazed on a screw plug with WP+ seal and includes clamp type loop terminals working on 230 V/400 V 3P. The 1”1/2 screw plug immersion heaters without electrical box are made of U-shaped heating elements, soldered on a screw plug with waterproof sealing. It includes M 4 threaded terminals and 8 mm diameter pins.
Threaded immersion heater - 750 - 9 000 W, M4
Vulcanic's screw plug immersion heaters, which comes without an electrical box, are designed with...
Threaded immersion heater - 750 - 9 000 W, M4
Vulcanic's screw plug immersion heaters, which comes without an electrical box, are designed with...
Threaded immersion heater / with thermostat - 1 000 - 9 000 W
Operating at a power supply between 1,000 to 9,000 Watts, immersion heaters equipped with thermostats...
Threaded immersion heater / with thermostat - 1 000 - 9 000 W
Operating at a power supply between 1,000 to 9,000 Watts, immersion heaters equipped with thermostats manufactured by Vulcanic are equipped with a screwed cable gland. They are constructed with U-formed heating elements that are attached on a screw plug, complete with a water-resistant sealing. These components are integrated with single-pole temperature thermostats.
Threaded immersion heater / with thermostat - 750 - 9 000 W
The Threaded immersion heater is manufactured by Vulcanic, and is specifically designed with thermostat....
Threaded immersion heater / with thermostat - 750 - 9 000 W
The Threaded immersion heater is manufactured by Vulcanic, and is specifically designed with thermostat. This heater is made U-shaped heating element soldered on a screw plug with waterproof sealing. It has electrical box in polyamide and screwed cable gland to generate more efficiently.
Moreover, this product has a capacity of 750 to 9 000 W, and is built with pins diameter of 8 mm.
Moreover, this product has a capacity of 750 to 9 000 W, and is built with pins diameter of 8 mm.
Threaded immersion heater / with thermostat - 2 000 - 12 000 W
Screw plug immersion heaters feature a triple pole thermostat and limiter. They are engineered for water and...
Threaded immersion heater / with thermostat - 2 000 - 12 000 W
Screw plug immersion heaters feature a triple pole thermostat and limiter. They are engineered for water and heating pumps. The heaters are made out of three U-shaped heating elements which are brazed on a screw plug. These elements are designed with a waterproof sealing. The heaters are also equipped with an electric box in a polyamide material.
It has pins with a diameter of 8.5 mm and an IP44 class rating.
It has pins with a diameter of 8.5 mm and an IP44 class rating.