+7 (812) 645-08-06
Dispensing valves, metering valves
select brand
Metering valve - max. 10 000 psig | CC series
The TESCOM CC metering valve has a rating of 960bar or 10,000psig, and provides exceptional flow control, as it features more than 20 turns...
Metering valve - max. 10 000 psig | CC series
The TESCOM CC metering valve has a rating of 960bar or 10,000psig, and provides exceptional flow control, as it features more than 20 turns from shut-off to full open. Ideal applications are GC carrier gas, injection systems, calibration systems, critical fluid extraction and sampling systems.
This valve can be used at low and high pressures and offers positive pressure application. Gas flow is also controlled with a high amount of accuracy. Seat wear reduction is made possible with features such as the non-rotating stem.
This valve can be used at low and high pressures and offers positive pressure application. Gas flow is also controlled with a high amount of accuracy. Seat wear reduction is made possible with features such as the non-rotating stem.
Gas metering valve - DN 2, PN 20 | D43216, D43529
The TESCOM series of Diaphragm metering valves from EMERSON offers services with high precision flow regulation of high...
Gas metering valve - DN 2, PN 20 | D43216, D43529
The TESCOM series of Diaphragm metering valves from EMERSON offers services with high precision flow regulation of high purity gases. They are used in applications concerning laboratories, R&D's and analyzers, as well as Electronic Capture detectors. They provide flow characteristics that are almost linear and are available with metal to metal seals. Moreover, the series are utilized for gas purities up to 6.0 and are ideal for applications concerning corrosive gases.
Gas metering valve - DN 2, PN 10 | D41663, D43472, D43595
The D43xxx Series, which is manufactured by TESCOM, is a needle metering valve that has been developed to...
Gas metering valve - DN 2, PN 10 | D41663, D43472, D43595
The D43xxx Series, which is manufactured by TESCOM, is a needle metering valve that has been developed to provide efficient, and reliable quality performance, and is specifically used for low pressure sampling valve applications. Its compact design has a nominal pressure PN of 145 psig. Its body is constructed out of brass and the seat is made out of copper for the needle metering valve, it is made out of silver.
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.101
2/2-way solenoid valve, DN 8, direct controlled. This valve is normally closed (NC). Valves of this type are medium separated seat valves, where the plunger is...
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.101
2/2-way solenoid valve, DN 8, direct controlled. This valve is normally closed (NC). Valves of this type are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve housing and outlet nozzle are a single piece moulding. This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used. Electrical operating safety is achieved by PBT coating of the coil and can additionally be supported by an internal protection circuit. The valve is available in different PSU valve housing types and is distinguished primarily by its food grade and hot water capability.
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.104
The Dispense Valve is 2/2-course solenoid valve integrated with a DN 8 nominal diameter, and exhibits a normally closed (NC) primary feature as well as a directly managed...
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.104
The Dispense Valve is 2/2-course solenoid valve integrated with a DN 8 nominal diameter, and exhibits a normally closed (NC) primary feature as well as a directly managed function. It sports a medium-abstracted seat valve structural design, wherein its built-in plunger mechanism is diverged by a diaphragm from the channel.
Technical specifications of the DN 8 Dispense Valve include a PPM triggering feature or minimal power utilization, a PBT-coated coil for electrical operational security, optional PSU valve housing options, a hot water and food grade characteristic, and a wide array of modifiable AC or DC voltage connection alternatives.
Technical specifications of the DN 8 Dispense Valve include a PPM triggering feature or minimal power utilization, a PBT-coated coil for electrical operational security, optional PSU valve housing options, a hot water and food grade characteristic, and a wide array of modifiable AC or DC voltage connection alternatives.
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.111
2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct acting and normally closed (NC). Valves of this design are medium separated seat valves,...
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.111
2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct acting and normally closed (NC). Valves of this design are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve seat is made of scale build up inhibiting PTFE. This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used. Electrical operating safety is achieved by PBT coating of the coil and can be supported by an additional protection circuit. The valve is available in different PSU valve housing types and is distinguished primarily by its food grade and hot water capability.
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.118
2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct acting and normally closed (NC). Valves of this design are medium separated seat valves,...
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.118
2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct acting and normally closed (NC). Valves of this design are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve seat is made of scale build up inhibiting PTFE. The internal slope of the inlet reliably redirects air bubbles back into the boiler. This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used. Electrical operating safety is achieved by PBT coating of the coil and can be supported by an additional protection circuit. The valve is distinguished primarily by its food grade and hot water capability.
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.114
2/2-way solenoid valve, DN 8, direct controlled. This valve is normally closed (NC). Valves of this type are medium separated seat valves, where the plunger is separated...
Dosage solenoid valve - DN 8, max. 60 mbar | 46.008.114
2/2-way solenoid valve, DN 8, direct controlled. This valve is normally closed (NC). Valves of this type are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve seat is made of scale build up inhibiting PTFE. The valve outlet nozzle is removable. This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used. Electrical operating safety is achieved by PBT coating of the coil and can additionally be supported by an internal protection circuit. The valve is available in different PSU valve housing types and is distinguished primarily by its food grade and hot water capability.
Gas metering valve
These gas dosing valves from PFEIFFER VACUUM are made to deal with applications that...
Gas metering valve
These gas dosing valves from PFEIFFER VACUUM are made to deal with applications that are specifically for gas dosing in vacuum processes. It has a rough dosing valve and an EVR 116 regulating valve. It may also come with gas dosing system control units and gas dosing system accessories, which makes it applicable to a variety of operations.
Metering valve
The UDV 40 is a manual all-metal gas dosing valve that delivers low dead volume and...
Metering valve
The UDV 40 is a manual all-metal gas dosing valve that delivers low dead volume and...