+7 (812) 645-08-06
Motorized rotary positioning stages
select brand
Electric actuator / rotary / hollow-shaft
The DGII Series is available with an integrated controller or pulse input with resolutions of 0,002-0,2°/step and 0,002-0,04°/step...
Electric actuator / rotary / hollow-shaft
The DGII Series is available with an integrated controller or pulse input with resolutions of 0,002-0,2°/step and 0,002-0,04°/step...
Tilting stage - NT 40, NT 65 series
The NT 40 and NT 65 are normally mounted horizontally and are considered high-resolution tilting elements. The axis of rotation is determined...
Tilting stage - NT 40, NT 65 series
The NT 40 and NT 65 are normally mounted horizontally and are considered high-resolution tilting elements. The axis of rotation is determined by the center of the two accurate steel balls. The tilting angle will be adjusted using a fine-thread screw or a micrometer.
The fastening grids help combine the two-axis setups. On top of that, they can be integrated for rotary and elevator stages, translation and measuring using other OWIS components. They have fine-thread micrometers or screws and use fastening grids in table surfaces.
The fastening grids help combine the two-axis setups. On top of that, they can be integrated for rotary and elevator stages, translation and measuring using other OWIS components. They have fine-thread micrometers or screws and use fastening grids in table surfaces.
Tilting stage - DNT 40 series
This equipment has been developed as part of OWIS'S optical components. The stages are...
Tilting stage - DNT 40 series
This equipment has been developed as part of OWIS'S optical components. The stages are made from highly durable aluminum with a reflection-resistant black anodized coating. It can be easily adjusted with thread screws or micrometers. Integrating OWIS'S WV 40-D25 with NT 40 stages makes the DNT 40 highly reliable and efficient.
Rotary positioning stage - ø 37 mm | DV 65 series
The rotary adjustment stage DV 65 allows an unlimited rotation like the DT 65, however not quite backlash-free.
The large aperture of ø 37 mm allows the users to retain large optics using special adapters. Other adapter...
The large aperture of ø 37 mm allows the users to retain large optics using special adapters. Other adapter...
Rotary positioning stage - ø 37 mm | DV 65 series
The rotary adjustment stage DV 65 allows an unlimited rotation like the DT 65, however not quite backlash-free.
The large aperture of ø 37 mm allows the users to retain large optics using special adapters. Other adapter...
The large aperture of ø 37 mm allows the users to retain large optics using special adapters. Other adapter...
Rotary positioning stage - ø 20 - 25 mm | DT 40 series
Specifically engineered for rotating optical elements in SYS 40, the OWIS Rotary Stages DT 40 have a limitless angle of rotation. Capable of operating...
Rotary positioning stage - ø 20 - 25 mm | DT 40 series
Specifically engineered for rotating optical elements in SYS 40, the OWIS Rotary Stages DT 40 have a limitless angle of rotation. Capable of operating...
Rotary positioning stage - ø 28.5 mm | DT 65 series
The Owis DT 65 Rotary Stages present infinite angle rotation capabilities, all while operating at resolutions of less than a single angular minute. The model's extensive specification...
Rotary positioning stage - ø 28.5 mm | DT 65 series
The Owis DT 65 Rotary Stages present infinite angle rotation capabilities, all while operating at resolutions of less than a single angular minute. The model's extensive specification...